IHC Fundex FVE 50 vibro čekić

The IHC Fundex ringvibrators are used in the driven cast in situ pile technology. First the steel casing with a lost bottom show is driven into the ground to its required depth with help of a diesel- or hydraulic impact hammer. The IHC Fundex ringvibrator is used to extract the steel casing after the reinforcement cage is installed and the fresh concrete is poored into the tube. The IHC Fundex ringvibrators distinguish themselves by the combination of great centrifugal force with a relative low weight. The structure of the IHC Fundex has very little wear and tear parts. A spring package covered in a steel housing is used to prevent that the vibrations go to the piling rig instead of in the ground and pile. These 2 springs allow a line pull of 40 tons, optionally you can also choose to configure it with double springs to realize a pull up capacity of 80 tons. The ringvibrators
are often powered by a IHC Fundex power pack which Foundiz has available from stock as well. The ringvibrators are worldwide used by a lot of satisfied customers and have already proven their high quality and reliability for many years.

Technical specifications: FVE 50 ringvibrator
Eccentric moment 50 kgm
Max. frequency 1600 rpm
Max. centrifugal force 140 ton
Max. line pull 80 ton
Total weight 6400 kg
Vibrating weight 6000 kg
Max. amplitude 19 mm
Max. oil flow 480 ltr/min.
Max. working pressure 320 bar
Min. tube diameter * 355 mm
Max. tube diameter * 609 mm
* clamping inserts are available per standard casing diameter like 355, 406, 457, 508 & 609mm